RM39.00
NEMA 42 steps bipolar Stepper motor 17HS4401S
Price RM39.00
Product SKU STP-17HS4401S
Brand No Brand
Size (L x W x H) 5 cm x 5 cm x 5 cm
Availability 20
Type
20 left
Quantity
Description
Highlight

NEMA 42 STEPS BIPOLAR STEPPER MOTOR 17HS4401S

  • Model: 17HS4401S
  • Low noise
  • Low fever
  • Smooth operation
  • Good acceleration performance


TB6600 STEPPER MOTOR DRIVER

  • Provides 8 kinds of micro steps (1, 2/A, 2/B, 4, 8, 16, 32).
  • Provides high-speed photoelectric separation of the input signal.
  • Provides a semi-automatic power lock function with energy saving.

NEMA 42 STEPS BIPOLAR STEPPER MOTOR 17HS4401S


Description:
42 Stepper Motor 2 Phase 1.8 Degree Step Angle 1.5A 17HS4401S Stepping Motor with 1m Cable for 3D Printer and CNC
 
 
Specifications:
  • Electrical principle and outline drawing : see outline drawing
  • Drive mode: constant current chopper drive
  • Excitation mode: 2- phase excitation ( two- phase four-beat operation), can rotate forward and backward
  • Steering: Turn on the power in the order of AB-BC-CD-DA , see CW from the shaft extension end
  • Rated current ( single phase ) : 1.5 A DC
  • Power supply voltage : 12-36V
  • Step angle: 1.8 °
  • Insulation class: Class B insulation
  • Connecting Interface: XH2.54/Dupont(optional)
  • Line Length: 1 Meter
  • Angle: 1.8°±0.09° 
  • Rated Voltage: DC 3.6V 
  • Phase Resistance(20℃): 2.4x(1±15%)Ω/Phase 
  • Phase Inductance(1KHz): 3.7x(1±20%)mH/Phase 
  • Holding Torque: ≥420mN.m 
  • Positioning Torque: 15 mN.m REF. 
  • Maximum no load starting frequency: ≥1500 
  • PPS Maximum no load operation frequency: ≥1900 PPS Insulation Resistance: ≥100MΩDC 500V 
  • Electrical Limit: AC600V/1mA/1S


TB6600 STEPPER MOTOR DRIVER


Description:

TB6600 arduino is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 arduino stepper motor driver has a wide range power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors.


The stepper driver supports speed and direction control. You can set its micro step and output current with 6 DIP switch. There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability.

As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.


Note: this is a newest upgrade version of TB6600 stepper motor driver.


 Features:

  • Support 8 kinds of current control
  • Support 7 kinds of micro steps adjustable
  • The interface adopts high-speed optocoupler isolation
  • Automatic semi-flow to reduce heat
  • Large area heat sink
  • Anti-high-frequency interference ability
  • Input anti-reverse protection
  • Overheat, over current and short circuit protection

Specification:

  • Input Current: 0~5A
  • Output Current: 0.5-4.0A
  • Control Signal: 3.3~24V
  • Power (MAX): 160W
  • Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
  • Temperature: -10~45℃
  • Humidity: No Condensation
  • Dimension: 96*56*33 mm/ 3.78*2.2*1.3 inches
  • Weight: 0.2 kg
  • Drive IC: TB67S109AFTG
What's in the box
  • 1 x Stepper Motor 
  • 1 x Cable

OR

  • 1 x TB6600 Stepper Motor Driver