Raspberry Pi
Refine Search
Features:
- Bi-directional control for two brushed DC motor.
- Support motor voltage ranges from 6VDC to 24VDC.
- On board test button for manual control of motor.
- Every channel output built with LED indicator.
- Maximum current up to 10A continuous (without heatsink at 25) and 30A peak (10 second).
- Current limiting at 30A.
- Raspberry Pi compatible connector.
- Solid state components provide faster response time.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Regenerative Braking.
- Speed control PWM frequency up to 20KHz (Actual output frequency is same as input frequency from Raspberry Pi).
- Support sign-magnitude PWM operation.
- Support TTL PWM from microcontroller, NOT PWM from RC receiver.
- Dimension:67.5mm x 59mm
RM93.50
Features:
- 16GB MicroSD with SD card adapter (Raspberry Pi Logo)
- SD Speed Class: Class 10
- UHS Speed Grade: UHS 1
- Application Performance: A1
- Sequential Read >12MB/S (A1 Standard 10MB/S)
- Random IOPS - Read: 2000 IOPS (A1 standard 1500)
- Random IOPS - Write: 500 IOPS (A1 standard 500)
- Recommended and comes from Raspberry Pi Foundation
- Pre-loaded with latest NOOBS
- NOOBs version: 3.3.1 (Release date: 14 February 2020), compatible for all Raspberry Pi boards including Raspberry Pi 4 Model B
RM46.00
Specifications:
- Operating Voltage: 5v
- Color: Black
- Current: 0.20A
- Dimension: 3 x 3 x 0.7 cm
RM7.50
RM9.00
Features:
- Resolution: 800 x 480 px
- Touch Screen Type: Resistive screen
- Touch Screen interface is through SPI pins from the 40-pin GPIO.
- Compatible with:
- Raspberry Pi3 Model B
- Raspberry Pi3 Model B+
- With backlight control switch (slide switch at the back of LCD)
- Working Voltage/Current: DC 5V / 1A
- Power source: Default from Raspberry Pi GPIO, alternatively USB Micro B on the back of display. next to the HDMI socket.
- It's suitable for Raspberry Pi series (not Raspberry Pi Zero due to mini HDMI on zero)
- You can download the official firmware and drivers to use it.
- And you can use integrated firmware to use it (the firmware with driver, is very easy).
- Touch screen interface: SPI with Raspberry Pi via the 40-pin GPIO.
- Dimension: 120mm x 74mm x 7mm
RM164.00
Features:
- Compatible all models of Raspberry Pi 1, 2 and 3; not to forget zero series too (just change the FFC cable)
- 5MP(megapixel) omnivision 5647 camera module
- Still picture resolution of 2592 x 1944
- Video supports 1080p at 30fps, 720p at 60fps and 640x480p 60/90 recording
- 15 pin MIPI camera serial interface plugs directly into the Raspberry Pi Board
- Size is 20mm x 25mm x 9mm
- Weight of 3g
RM51.95
RM56.60
Specifications:
- Model: HN-5258
- Input: AC 100-240V 50/60Hz
- Output: 5V/2.5A
- DC plug: Micro B USB
- Cable Length: 100cm
- Plug Specifications: UK Plug
RM16.80
Features:
- Easy to use
- Compatibility
- Multi-function
- Configurable
- Suitable for Learning
RM988.90
Features:
- Input: 100-240V ~ 50/60Hz 0.6A
- Output: Regulated +5VDC 2A
- Wire length: 85 / 18cm
RM21.90
Specifications:
- Input voltage: AC (AC) 100V-240V 50-60Hz
- Output voltage: DC (DC) 5V
- Rated output current: 3A
- Modulation method: pulse width modulation
- Work efficiency: 90%
- Temperature coefficient: ±0.02% °C
- Start time <1S (AC 220V input Io=10%)
- Output ripple & noise: 100mVp-p
- Output voltage accuracy: 95%
- Voltage regulation rate: 5%
- Load adjustment rate: 4%
- Product solution: Transistor solution or IC* solution
- Protection function: Overload protection 105%~150% rated power
- Automatic recovery overvoltage protection 115% ~ 135% of the voltage nominal plant
- Dielectric strength: Input - output AC 2000V / 10 seconds
- Insulation resistance: input - output > 50MΩ, DC 500V
- Environment: Operating temperature 0～45°C, 20%～90%RH
- Storage temperature -20 ° C ~ 85 ° C 10% ~ 95% RH
- Output DC interface: Type-C USB
RM19.80
Features:
- A great kit for Raspberry Pi beginner to get started
- With Grove modules, no wiring is necessary
- Plug and Use module
- Include 10 Grove modules and a Grove base for Raspberry Pi
- Now the kit comes with the Grove Base Hat for Raspberry Pi, making Raspberry Pi compatible with the Grove System.
- The Grove Base Hat for Raspberry Pi provides Digital/Analog/I2C/PWM/UART port to meet all your needs. With the help of build-in MCU, a 12-bit 8 channel ADC is also available for Raspberry Pi.
RM141.90
Specifications:
- Model: HN-5258
- Input: AC 100-240V 50/60Hz
- Output: 5V/2.5A
RM17.90
Specification:
- Model: 0530
- Input: AC 100-240V 50/60Hz
- Output: 5V/3A
- DC plug: Micro USB
- Cable Length: 115cm
- Plug Specifications: UK Plug
- Push ON Push OFF button on the cable
RM18.50
Details:
- Measurement: 146.8mm x 97.5mm x19mm
- weight:110g
- Operation voltage: 3v, AAA*2
- Operation current:<50 mA
- Sleep current:<1 mA
RM35.00
Features:
- Extend 40-pin GPIO of Raspberry Pi out to Breadboard friendly PCB and header pin
- Fully Assembled, plug and use
- GPIO is nicely labeled
- 40-way IDE/IDC rainbow cable, polarized, ~30cm length
RM15.00
Features:
- Customized for Raspberry Pi 2B, Pi B+ and Raspberry Pi 3 Model B
- Access the board more easily : Power , Audio , USB , LAN , USB, SD card , HDMI .ect interfaces.Cooling design with fan : great heat dissipation performance , help to extend using life of Raspberry Pi.
- Notice: this product is a DIY case , and needs you to assemble it , more joyful for your Raspberry Pi .
- Material: ABS
- Not included Dc Fan and Raspberry PI
RM11.98
RM16.98