RM263.00
6 Channel Servo Player (RC Servo Controller)
Price RM263.00
Product SKU SP-6
Brand No Brand
Size (L x W x H) 10 cm x 8.2 cm x 3 cm
Points Needed 26300
Availability 26
Quantity
Description
Highlight

Features:

  • Operate up to 6 RC servo motors at a time or simultaneously
  • Each knob will control your RC servos up to 180°
  • Can be used in Continuous RC Servo Motor (360 degree)
  • Wide range of input voltage: 3.7-12VDC

Description:

The 6 Channel Servo Player is a controller board which allows user to record servo motor movement and playback it back exactly without writing source code to it. With this one unit of this controller board, you can operate up to 6 RC servo motors at a time or simultaneously. Each knob will control your servos up to 180°. There have 4 different servos animation can be recorded in different channel. The recording time is up to 35 minutes for each channel. Perfect for animation, robotic projects or wherever you need the exact same movement each time. Simply plug in a battery or regulated power supply, plug in your servos, rotate the corresponding knobs and your servos will move proportionally to the knob movement. Once you are ready to record the movements, make sure the SD card slotted in, slide the selector switch over to record and then move the servos again. The memory stores all the servos motions and even the delay time between motions inside the SD card. Once you have recorded the movements and are ready to play them back, use the selector switch to choose between single or loop mode. Single mode will play the movements back once while loop mode will continuously play back the movements. Moreover, you even can choose whether you want the motion to be fast or slow in record mode. If you want to change the servos animation, just overwrite it! The advantages of having a SD Card is, you can save your recorded movement as back up file or just copy the same file to another servo player.

 

 

 

Related DIY project that using 6 Channel Servo Player (RC Servo Controller), Checkout the video of DIY Self-moving Scary Skeleton below:

 

You may need this item for your Robotic Project:


Features:

  • Operate up to 6 RC servo motors at a time or simultaneously
  • Each knob will control your RC servos up to 180°
  • Can be used in Continuous RC Servo Motor (360 degree)
  • Wide range of input voltage: 3.7-12VDC
  • Comes with 8GB memory card
  • 4 recording channels of movement. Each channel can control up to 6 servo motors and the maximum time for each channel is up to 35 minutes.
  • 2 Playing modes: Single or Loop
  • Direct interface with sensor up to 6 active low sensors (plug and play)
  • Direct connect to DC power source (肖5.5 power seat provided)
  • Led indicator
  • 2 selected mode: Interrupt and Non-Interrupt Mode
  • Size: 82mm*100mm
  • Weight: 100gram


Packing list:

  • 1x 6 Channel Servo Player (RC Servo Controller)

 

Attachment:

 

Video:

 

Dimension:

 

What's in the box

Packing list:

  • 1x 6 Channel Servo Player (RC Servo Controller)