All Products
Features:
- Plug & play, controlled from RC directly.
- Auto calibration upon power up.
- Selectable mixed or independent input mode.
- Bidirectional control for two brushed DC motor.
- Operating Voltage: DC 7V to 30V
RM156.00
Features:
- Bi-directional control for 1 brushed DC motor.
- Support motor voltage ranges from 7V to 25V (Rev1.0), 7V to 30V (Rev2.0).
- Maximum current up to 10A continuous and 15A peak (10 seconds).
- 3.3V and 5V logic level input.
- Solid state components provide faster response time and eliminate the wear and tear of mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Regenerative Braking.
- Speed control PWM frequency up to 10KHz.
- Stackable I/O header pin.
- Selectable digital pins for PWM and DIR.
RM58.00
Features:
- Shield for Arduino form factor.
- Bidirectional control for two brushed DC motor.
- Control one unipolar/bipolar stepper motor.
- Operating Voltage: DC 7V to 30V
- Maximum Motor Current: 10A continuous, 30A peak
- Buck regulator to produce 5V output (500mA max).
- Buttons for quick testing.
- LEDs for motor output state.
- Selectable Arduino pins for PWM/DIR inputs.
- PWM/DIR inputs compatible with 1.8V, 3.3V and 5V logic.
- PWM frequency up to 20kHz (Output frequency is same as input frequency).
- Overcurrent protection with active current limiting.
- Temperature protection.
- Undervoltage shutdown.
RM104.00
Features:
- Input Voltage (Motor): 7 - 35VDC
- Single power operation
- Dual Channels, it can drive two brush motors bidirectionally, independently or mixed as differentiate drive.
RM210.00
- Produces light similar to a candle flame.
- Ideal for mood lighting.
- Does not require a current limit resistor.
- Suitable for through-hole mounting
- Cathode identified as the shorter lead
- Water clear lens
- Excellent weather resistance
- Long operational life
- Very high luminosity
RM0.80
RM0.80
- 10nF ceramic capacitor
- Single layer and resin coated
- Linear temperature Coefficient of capacitance.
RM0.20
- 10pF ceramic capacitor
- Single layer and resin coated
- Linear temperature Coefficient of capacitance.
RM0.20
Specification:
- Capacitance: 10pF
- Type : Adjustable
- Size: 6mm x 5mm x 5mm
RM0.80
Specification:
- Capacitance minimum: 25.0pF
- Capacitance maximum: 120.0pF
- Colour: Brown
- Size: 6mm x 5mm x 5mm
- Adjustment type: Screwdriver Slot
- Operating Temperature Min: -55°C
- Operating Temperature Max: 85°C
- Body diameter: 6mm
- Capacitor Mounting: Through Hole
- External Length / Height: 4.8mm
- Terminal Type: Radial Leaded
- Voltage Rating V DC: 100V
RM1.20
Specification:
- Capacitance: 126PF
- Type : Adjustable
- Size: 21mm x 21mm x 17mm
RM2.50
Resources
- Raspberry Pi High Quality Camera Module Product Brief - by Raspberry Pi foundation
- Typical CS-Mount Lens Guide
- Raspbian - Latest Operating System by Raspberry Pi foundation
RM130.80