MCO3.0: No worry, we are still operating and ship order as usual. Stay safe.
MYBOTIC SERIES STEM PROJECT KIT
MYBOTIC SERIES STEM PROJECT KIT
Sort by
Show result

Features:

  • The timing and output relays configuration are set by user.
  • 2 timer mode, i.e. Count Up Mode or Count down Mode.
  • Both mode (Count Up Mode or Count down Mode) works separately and standalone.
  • Both mode (Count Up Mode or Count down Mode) can be set up to 99 data.
  • Direct connect to DC power source (Ф5.5 power seat provided).
  • The recorded data can be edit or clear.
  • 2 Playing modes: Single or Loop
  • 2 Output relays that can be used to connect external device.
  • Able to interface with Active LOW type sensor.
  • Input voltage: DC 8V to 24V
  • Size: 95mm*80mm.
RM98.00

Features:

  • Fully automatic and touch-free operation, to avoid the second cross-infection.
  • Smart sensor hand sanitizer dispenser using digital circuit control, ultrasonic sensor and battery.
  • Wide range of input voltage: 7-12VDC
  • Circuit schematic diagram provided
  • Arduino code provided
  • Configure the kit without coding
  • Operating Voltage: 5V
  • Current consumption

            * Normal condition : 20mA
            * Relay ON condition : 70mA

  • Accuracy: ± 1 cm
  • Self-assemble or Full assemble version
  • Led indicator
  • Size: 60mm*60mm
RM98.00

Features:

  • Non-programmable
  • Self assembly
  • Use battery 6V
  • Simple wiring
RM69.80

Features:

  • Configurable
  • 4 channel relay module
  • Easy to connect to Blynk
  • Self-assembly
  • This kit is able to control external devices via relay
  • Source Code and schematic provided
RM173.00

Features:

  • Uses 6V Relay.
  • This kit is able to control external devices via relay.
  • Non-programmable kit.
  • Recommended input voltage: 6V to 9V DC.
  • Size: 40 mm x 35 mm
  • Battery and tube is included.
RM33.70

Features:

  • Controllable using Blynk App
  • Configurable kit
  • Self assembly
  • Wide range of input voltage: 7-12VDC
  • Circuit schematic diagram provided
  • Arduino code provided
  • Operating Voltage: 5V
  • Compatible with ANDROID/IOS
  • Simple wiring
RM189.00

Features:

  • Wide range of input voltage: 8-24VDC
  • Direct connect to DC power source (Ф5.5 power seat provided)
  • Direct plug in Micro-USB (5V) for power supply
  • 40 configurable I/O pins 
  • 4 configurable UART pins
  • Circuit schematic diagram provided
  • Arduino code provided
  • Configure the kit without coding
  • Operating Voltage: 5V 
  • Current consumption (normal condition): 160mA
  • Able to sub-stand current up to 2.5A for external plug it sensor, module and device
  • Self assemble or Full assemble version
  • Led indicator
  • Size: 70mm*75mm
  • SD Card is Not Included
RM149.00

Features:

  • Wide range of input voltage: 7-12VDC
  • Circuit schematic diagram provided
  • Arduino code provided
  • Configure the kit without coding
  • Operating Voltage: 5V
  • Current consumption

              ⮚ Normal condition : 20mA
              ⮚ Relay ON condition : 50mA

  • Range of counter: 1 to 999
  • Range of Timer: 0 to 180 seconds
  • Self-assemble or Full assemble version
  • Size: 60mm*60mm
RM85.00

Features:

  • Wide range of input voltage: 7-12VDC
  • Circuit schematic diagram provided
  • Arduino code provided
  • Configure the kit without coding
  • Operating Voltage: 5V
  • Current consumption

             *Normal condition : 20mA
             *Relay ON condition : 70mA

  • Accuracy: ± 1 cm
  • Self-assemble or Full assemble version
  • Led indicator
  • Size: 60mm*60mm
RM88.00

Features:

  • Uses multi-core wires immersed in water to detect water level.
  • This kit is able to control external devices via relay.
  • Non-programmable kit.
  • Microcontroller not required.
  • Recommended input voltage: 6V DC.
  • Self assembly.
  • Size: 70 mm x 60 mm
  • Buzzer is not included
RM33.00

Features:

  • Non-programmable kit.
  • Microcontroller not required.
  • Uses IC 555 timer.
  • Self assembly.
  • Recommended input voltage: 9V DC.
  • Size: 40mm x 38mm.
RM9.43

Features:

  • Uses LM358P operational amplifier controller.
  • Uses LM35 temperature sensor.
  • This kit is able to control external devices via relay.
  • Non-programmable kit.
  • Recommended input voltage: 6V to 9V DC.
  • Self assembly.
  • Size: 40 mm x 40 mm
  • Buzzer is not included.
RM22.50

Features:

  • Uses LM358P operational amplifier controller.
  • Uses light dependent resistor (LDR) to detect light intensity.
  • This kit is able to control external devices via relay.
  • Non-programmable kit.
  • Recommended input voltage: 6V to 9V DC.
  • Self assembly.
  • Size: 40 mm x 40 mm
  • Light bulb is not included.
  • Sleep Light Kit - Switch ON when night fall
RM13.50