Description:
The 24V solenoid controlled fluid valve with simply connect a fluid source to the G1/2" threaded inlet and it will interrupt the flow until 24V is applied to the fast-on connectors on the solenoid when you need to have smart gardening system at home or to control the water flow with your microcontroller or computer.
Note: This is not a gravity-feed solenoid. This means that you will need enough water pressure to fully open the valve. Check the datasheet below for exact details. It operates at a minimum of around 3 PSI, allowing around 3 L/min of flow. Although the datasheet shows the valve working at 220 VAC, it's actually 24 VDC. A garden hose or other pressurized system should work just fine.
Specification:
-Type: Normally closed valve
-Working voltage: DC24V
-Interface: G1/2
-Non-pressure hydraulic valves : for 0-0.15MPA water
-Rated power: 5w
-Fluid: 0-100C water
-Flow range: 0.02Mpa>1.5L/min;0.10Mpa>7L/min;0.30Mpa.12L/min;0.80Mpa>20L/min
Package Included:
-1 x DC 24V Solenoid Valve
Description